There are two versions of the Kawasaki® 750 Enhancer. Both models feature the increased spark energy you expect from MSD plus they have an adjustable rev limiter and holeshot rpm limit.
The rev limit is adjusted with a potentiometer on the back of the ignition housing. The holeshot feature lets you activate a lower rpm limit that is best to use for quick starts at the beginning of a race. Also, these ignitions can be connected to the factory overheat sensor. With this feature, if the water temperature gets too high, the Enhancer will limit the rpm to a safe value to avoid any engine damage.
Kawasaki® Accessories
Coil Blocks (PN 4296)
These coil blocks are required when mounting the Kawasaki® 750 Enhancer Ignition in a SS, Xi, or XiR model. It will tilt the coil to prevent it from hitting the Enhancer Ignition.
Enhancer Retard Module
(PN 4331)
The Enhancer Retard Module is designed to retard the timing of the Enhancer ignition by 5°. On racing and high performance engines with extremely high compression using the Enhancer and Timing Advance Plate, this module is recommended.
Timing Advance Plate
(PN 4332)
The timing advance plate is recommended for all Kawasaki® 750 engines running the Enhancer Ignition. This plate advances the timing 7° for a boost in low to mid range performance. Note: If you are running excessive compression or low octane fuel it is recommended that you run the retard module listed. Must be used with PN 4251 on SXi, XiR and ZXi.
Go to Multi-Channel Ignition System
