If you are connecting a tachometer to an MSD Ignition, or your application is equipped with electronic fuel injection then you may need to use this Tach/Fuel Injection Adapter to ensure correct operation. This Adapter will correct the operation of most tachometers and fuel injection pump relays that do not work directly off of the MSD Ignition’s 12 volt square wave tach output terminal.
Vibration Mounts
Vibration is hard on components and in racing applications, there’s a lot of vibration. To protect your MSD or many other components, we recommend the use of these vibration mounts. Three sizes are offered.
1" x .75", 4/Card (PN 8800)
.75" x .63", 4/Card (PN 8823)
.44" x .50", 3/Card (PN 8825)
Universal DIS Cam Sync (PN 8916)
The Universal DIS Cam Sync Generator will produce a sync signal for the Nitro Harley Ignition and the MC-4 Ignition Control. This way you can take advantage of our individual cylinder timing feature on these controls.
The Cam Sync Generator will produce a cam sync signal by detecting when the number one cylinder is under compression. This is done through its signal wire which is wrapped around the designated spark plug wire.